A squeaky metal bed frame isn’t just annoying, the noise can also disrupt your sleep and prevent you from feeling well-rested in the morning. Even if you don’t wake up in the middle of the night, you may be sleeping uncomfortably on a squeaky bed than on a well-maintained one. There are a few things you can do to limit, if not eliminate, your noisy bed. Learning how to fix a metal daybed can come in handy.
The squeaking noise can be triggered by different factors such as loose bolts, friction, or other causes. Squeaking can also mean that your bed frame is about to fail. Climate can also make your bed frame squeak, so try to discover if the squeaks are seasonal, or if the noise is all year-round. Learning how to fix a metal daybed is not a difficult task. It may also save some cash in the long run, as you won’t have to buy a new bed frame. Here are some steps to identify the cause of your squeaking bed frame and how to repair it.
Finding the Cause
- Take the mattress off the bed frame and lay it on the floor.
- Check if your mattress causes squeaking. Before you start, ensure that it’s not the bed itself that causes the noise. Get on the mattress and move around a little bit if you hear any squeak, then the mattress is most probably the culprit.
- If the mattress is clear, try to rock the posts on the metal daybed and listen carefully. Squeaking usually occurs where the posts attach to the rest of the bed frame, so try rocking each post. Pinpoint the exact location where the squeaking is coming from.
- If the posts are not causing any noise, then proceed to the slats on the bottom of the bed frame. The slats are the metal planks that support the bed. Apply pressure to the metal slats to see if they’re causing the squeaking.
Fixing a Metal Daybed
- Identify the cause. Remove the mattress and inspect all the bolts and nuts in your metal bed frame to determine if they are tightened firmly. If you notice any loose bolts, assess their size and get a proper wrench. If you do not find any loose bolts or nuts, check how often the squeaks happen. If it only happens for a specific season, then your bed frame might only need some lubrication. If the bed frame squeaks regardless of season, and you cannot identify the squeaks’ exact source, you might need to take the bed frame apart.
- Clean and lubricate your metal daybed. After you dismantle the bed frame, wipe all the screws, bolts, and nuts with a clean cloth. Apply lubricant on the bolts, screws, and nuts. Wipe off the excess to prevent debris build-up. Another good option is to wrap all the bolts, screws, and nuts in a sealant tape. It will act as a lubricant to avoid future squeaks. If the bed frame still squeaks, take the bolts out again and insert a plastic washer to each of them.
- Apply beeswax. Check your bed frame to identify areas where metal parts rub against each other. You can quickly identify them because the metal looks shiny. Rub beeswax in those areas to lubricate them. Doing so ensures no further squeaks.
- Replace any bolt or screw you cannot fix. Depending on how long have you had your metal daybed, some of the bolts and screws might just need to be thrown away. These are too rusted to function. Take them out carefully and replace them with new ones.
- Replace metal washers. Metal washers are the round discs in between the bolt head or screw and the metal surface. Constant friction might cause these washers to squeak. Instead of metal, use nylon or rubber material for a quiet and more flexible fit.
- Reassemble your bed frame. Insert all bolts, screws, and nuts back into their holes. Tighten them firmly with the appropriate wrench. After you have reassembled the bed frame and tightened all of screws and bolts, reassess if it makes any more squeaks. Your bed should feel considerably more rigid than before.
- Even out bed legs. Some squeaks can also come from uneven floors. In order to fix this problem, you can put something under the legs like folded paper. Non-slip furniture pads can also come in handy. If you feel like doing some DIYs instead, you can utilize rubber strips to make alternative non-lip pads.
- Lubricate your metal daybed regularly. Regularly inspect your metal bed frame and apply lubricant when necessary. This is important if you want to prolong the life of your bed. This step is effective on how to fix a metal daybed.
In case you experience recurring issues even after completing the steps on how to fix a metal daybed, it might be a sign that you need to buy a new one. As long as you can tolerate the noise, then using the same bed is fine. However, if it bothers you and inhibits you from getting a night of good sleep, then do consider a new purchase.
Conclusion
A squeaking bed can be annoying to deal with. However, there are steps you can do to identify where the squeak is coming from, and eventually doing some adjustments and fixes to solve the problem. Getting enough sleep is a must in your overall well-being. So learning how to fix a metal daybed can come in handy. This knowledge can help you save more money and enjoy your bed to the fullest. Know more about daybeds.