How To Put A Toddler Bed Together
Time flies by pretty fast when you have a young child at home. It may only seem like yesterday you were assembling your baby’s crib, and now, you are learning how to put a toddler bed together. If you have looked at the instructions and you are feeling lost, this article will serve as a thorough guide to making sure you build a safe and sound bed for your toddler. It can be a pain to think you have done everything right only to find out your toddler bed is missing a piece or is wobblier than expected. So be sure to read through this article carefully to ensure your toddler bed comes out right in the end.
The Parts and Pieces of a Toddler Bed
In this article, we will specifically learn how to put together a Delta toddler bed. Most Delta toddler beds follow the same set-up of many toddler beds in the market. Whether you have a sleek and fancy toddler bed or one with Minnie Mouse, Paw Patrol, and other Disney designs, you will still find this guide useful.
The first step to assembling a toddler bed is to unbox and check everything as soon as your package is delivered. If you notice any part is damaged or missing, you should return the package or have it replaced.
These are the typical parts and pieces you will find to put together your toddler bed:
- Headboard and footboard
- Safety rail
- Male and female bars
- Fabric support
- Long and short legs
- Stickers (if any)
When it comes to the screws, make sure you have the right number and the right screw for the right hole. If you need extra or replacement screws, the manufacturer can actually provide you with some.
Check the wooden toddler bed instructions for the list of parts and pieces that you require and see to it that you have all those parts and pieces mentioned. Once you are sure they are all accounted for and in good condition, we can get into how to put a toddler bed together.
The first step to how to put a toddler bed together is assembling the mattress support. Take two male bars and one female bar. Slide those through the fabric tunnel of the mattress support. Take your crossbar and insert that through the tunnel as well. The male bars will have two holes. Attach the crossbar to the male bars by inserting the crossbar into the two holes of the male bars. Make sure you do this before doing the same with the female bar.
The two male bars should have two center holes. Take the center crossbar and insert it into those two holes. However, make sure the holes of the center crossbar and the holes of the two male bars re perfectly aligned. Use two screws to attach the center crossbar to the two male bars.
There should be a hole in the female bar. Slide the crossbar into this hole, then slide the crossbar through tunnel of the fabric. Do the same with male bar. You do this by taking the male bar and sliding that through the fabric tunnel. To connect the female bar and the crossbar, you need to rotate the female bar inward and raise the unconnected side.
The Headboard and the Footboard
Now, let’s move onto the headboard. Look for the plug where you have to push open the end of the long leg. You can locate it under the knob that is on one side of the headboard. Align the hole in the long leg and the hole in the headboard, then use a bolt to secure them together. Follow the same process with the other long leg.
To assemble the footboard, you can also follow the same steps for putting together the headboard. Once you are done putting the parts of the footboard and headboard together, you can attach the stickers to them. The sticker for the headboard should be placed inside so that the design is displayed right above your toddler’s head. For the footboard, the sticker should be placed on the outside.
The Frame and The Center
Once you have the footboard and headboard assembled, you will need to attach them to the frame of the toddler bed. The flat ends of the frame should be inside of the legs of the headboard and footboard. There should be pre-drilled holes on the bed frame. Insert the locking nuts and bolts into those holes.
The center leg is important since this will support the weight of your toddler. Use the locking nuts and bolts to attach the center leg to one side of the bed frame. Follow the same steps for the other end of the frame.
The Safety Rails
Aside from the size, safety rails are what set a toddler bed apart. They make sure your toddler will not fall out of the bed while sleeping. Take one safety rail and align the hole of the center leg to the hole of the safety rail. Use locking nuts and bolts to secure these two parts together. Follow the same process for the safety rail on the other side. Know more about toddler beds.
Looking at a toddler bed, you wouldn’t think it would be so challenging to put together, but once you receive all the many parts and pieces, you are searching for how to put a toddler bed together. The instructions that come with the bed can sometimes be difficult to follow as well, but I hope this guide has given you a better idea. Now, you and your toddler can be sure that they can sleep safe and sound on their bed.
April 2, 2021
By: Ammaarah Mason
Transitioning your toddler from their crib to a big bed is, well, pretty stressful. Your little one will start crying or leave their room and wake you in the wee hours of the night.
April 2, 2021
By: Sara Dale
When it’s time to update your child’s sleeping arrangements, you can save both some time and money by learning how to change crib to toddler bed.